http://archlinuxarm.org/forum/viewtopic.php?f=53&t=6040
I picked up a couple of POGO-V4-A1-01’s from eBay for $7.50 apiece shipped and thought I might try using them for sensor devices and/or generic simple alerting systems. The hardware mod listed in this forum will be very helpful in adding another interface to the device, as my understanding is that it will only boot from the USB or the SATA port, and the device will be much more useful if the USB port is available for peripherals.
http://www.networkworld.com/article/2358443/software/94947-13-hot-new-open-source-projects.html
Couple of pretty interesting pieces here. I could see some handy graphing capabilities for network monitoring coming out of D3JS.
https://supportforums.cisco.com/blog/9913621/using-open-source-dogtag-certificate-authority-ise-byod
I tinkered with this at work, but found it lacking from a production standpoint. This may be due in part to working outside my typical Debian-based comfort zone. Will probably look at it again at home and see if it shows more promise with experience.
http://l7-filter.clearfoundation.com/
Integrates with netfilter using QUEUE. Interesting methodology, potentially quite useful.
http://www.pocketables.com/2012/09/beginners-guide-to-tasker-part-6-autoremote.html
Some cool stuff here if I get a chance to get back to it. In most cases I don’t care too much about where a notification comes in, but there’s some useful info on communications between systems.
https://github.com/cantino/huginn#huginn–your-agents-are-standing-by
Nifty project. I like the fact that it’s all under my own roof, and that I have the capability to trigger beyond just web.
http://www.computerworld.com/s/article/9247455/Data_manipulation_tricks_Even_better_in_R
Interesting walk through comparing R with Excel, and looking at how to do some of the same things, with additional links to a quick start on the language.
Powered by WordPress